The Importance of Colors of Underground Utility Lines
Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Today, the risks have been lessened although not completely eliminated. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.
Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.
GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. Calling 811 is enough for the property owner to let companies located their lines.
It is easier to identify underground utility lines today because they now use different colors for each utility. Below are some of the colors used for different utility lines.
If you see white lines, then these are proposed excavation sites. You can mark areas with white lines that will soon be excavated.
Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.
Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.
Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Purple lines are used for reclaimed water, irrigation, and slurry lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.